Heat Staking

Heatstaking is a method of joining two or more parts, where at least one is made out of plastic. The bond is made by partially de-forming the plastic part to fix the other. Heatstaking is the most efficient way to  bond metal to plastic, and is commonly used in high volume/low cost applications in the automotive, telecom and appliance industries.

The process works by heating the plastic to a temperature above the glass transition temperature via the use of super-heated air or a thermode, and then applying pressure in order to deform it and create the stake. The plastic is then cooled down again – under constant pressure – below the glass transition temperature, ensuring good fixation of the parts. This cooling can be done with compressed air if using a thermode, or with a cold, preformed tool if super-heated air is used.

Heatstaking design guidelines:

  • Plastic material with glass fiber filling
  • The % of glass fibers is typically between 10-40%, where 40% is the most abrasive to the tooling in the system
  • A keep-out zone of 1.5mm – 2mm around each heatstake pin is ideal
  • Average heatstake applications use a force of 22lbs – 34lbs but can vary depending on the pin diameter

Types of plastic to use:

  • Materials that can be processed:
    • PA66 GF30 (Glass filling 30%)
    • PPA GF33 (Glass filling 33%)
    • POM
    • PBT + 20% FV – VO (Glass filling 20%)
    • PPS GF40 (Glass filling 40%)
  • Glass filling up to maximun 40%
    • Higher glass filling will reduce thermode lifetime
  • All plastic materials used for injection moulding can be used for Heatstake Technology
  • Rubber (EPDM) and Silicon Materials are no good for Heatstake process

 

 

For more information, read our Fundamentals of Heatstaking paper

News & Events - AMADA WELD TECH

News

Learn more about AMADA WELD TECH and our industry-leading products in our newsroom.

Visit the Newsroom
Learning - AMADA WELD TECH

Learning Center

An educated customer is a happy customer! Learn more about our eight different manufacturing technologies, watch a video, schedule some training or sign up for our blog in the Learning Center.

Visit the Learning Center
Support - AMADA WELD TECH

Support

Everyone needs a little help now and again. Visit the support center for technical documents, applications assistance, field service, customer service, sales assistance, software downloads and more.

Visit the Support Center